Maintenance Lubricants and Penetrating Fluids
Leybold Vacuum Products Inc Leybonol LVO 210 Synthetic Oil, 5 L
Synthetic oil (ester oil with additives). Very high thermal, oxidative and chemical stability, good deterging and dispersion characteristics, excellent wear protection. For high temperature applications, pumping of air, chemically inert gases, carbon dioxide (dry),carbon monoxide, organic solvent vapors, resin vapors, etc.
Enterprise Technology Solutions Smart Straw Spray Lubricant, 11 oz Aerosol Can
Smart Straw Spray Lubricant, 11 oz Aerosol Can
Med Vet International Sterile OB Lube-Vet Label, 1oz, J0781, 12 Count
This small sterile lube packet is great for lubing up a vaginal speculum or anywhere a small amount of sterile lube is required, especially OB work. Non-spermicidal. Easy open 1 oz. packet. 12/case.
Electron Microscopy Sciences Santovac 5 for Ultra High Vacuum Range 500 ML
A Polymethyl Ether, designed for an ultra high vacuum range: 10-10 torr. Ultra low vapor pressure results in low ultimate pressures; there is no need for a cold trap and it is suitable for diffusion pumps. Santovac 5 may discolor with use but it will maintain its physical properties.
Cotronics Corp Aluminum Durabond 950 Pint
Durabond Adhesives were specially formulated to bond metals, ceramics and dissimilar materials for use to 2000ºF. These metallic composite adhesives overcome the brittle bonds obtained with ceramics and offer some of the ductility and impact resistance associated with soldering and welding. Durabond adhesives can be drilled, tapped, machined, etc. They do not contain Epoxies or Silicones which would limit their use to 600ºF. These composites are inorganically bonded and chemically cured. They are safe and easy to use. No odors. No VOC's. Just mix, apply and cure at room temperature. Base: Aluminum, Color: Density (# / ft3) 120, Thermal Expansion (10-6/ºF) 10, Pot Life (Hours) 2, Bond Strength @ 200ºF (psi) 500 Bond Strength @ 1200ºF (psi) 1000, Components 2, Mixed Ratio (A / B) 100/60, Cure (@ R.T.) 24
Waters Corporation Oil Demister Filter, Annual Replacement, 1 per Package
This Oil Demister Filter is a spare part designed for Waters Corporation products.
- Annual replacement schedule.
- Includes 1 unit per package.
MSC Dow Corning 4102963 3 oz Tube Clear RTV Silicone Joint Sealant -85 to 356°F Operating Temp, 13 min Tack Free Dry Time, 24 hr Full Cure Time, Series 734
Dow Corning 4102963 3 oz Tube Clear RTV Silicone Joint Sealant -85 to 356°F Operating Temp, 13 min Tack Free Dry Time, 24 hr Full Cure Time, Series 734
Electron Microscopy Sciences Loctite 409™ Super Bonder Tube 3 GR
General-purpose gel adhesive, clear, gap fills 0.010"; surface insensitive Ethyl, tensile shear strength 3,200 psi, and temperature range -65 deg F to 180 deg F. Cure speed: fixture - 75 seconds, full - 24 hours.
Ace Glass, Inc. EPOXY ADHESIVE 30ML JAR EPOXY ADHESIVE 30ML JAR
A two-component system; cures to a film highly resistant to chemicals which tightly bonds the PTFE sleeve to glass. If sleeve is damaged, the epoxy may be removed with boiling formic acid and a new sleeve may be attached. Supplied in 30mL jars with activator in separate container. 30mL will cement 25 or more joints, depending on size
Electron Microscopy Sciences Epo-Tek H20S Adhesive 1 OZ
Epo-Tek H20S is a modified version of Epo-TekH20E. Epo-Tek H20S is a highly reliable, two component, silver-filled epoxy with a smooth, thixotropic consistency (mixing ratio 1:1). This modified version offers high electrical conductivity, short curing cycles, proven reliability, and the convenient mix ratio, Epo-Tek H20S is extremely simple to use. Epo-Tek H20S pot life is 2.5 days and shelf life is one year when store at room temperature.
Grainger Antifreeze Coolant, 1 gal
Valvoline™ ZEREX™ Original Green Antifreeze/Coolant has a low-silicate formula that offers superior cooling system protection in heavy-duty applications with use of SCA (supplemental coolant additives). The traditional universal ethylene glycol-based formula has a proprietary corrosion inhibitor package to help prevent rust and corrosion, and a high-quality defoamer. ZEREX Original Green will not harm gaskets, hoses, plastics, or original vehicle finishes. It offers protection up to 150,000 mi./3000 hr./5 yr., and is compatible with major American coolant brands.
Electron Microscopy Sciences M-Bond System, M-Bond 600, 1 kit
The M-Bond adhesives are high-performance epoxy resins, which are formulated especially for bonding strain gages and special-purpose sensors. When properly cured, these adhesives are useful in temperatures ranging from -452F to +350 F (-269C to+ 175C) with M-Bond 43-B, and to +700F (+370C) for short periods with M-bond 600 and 610. In common with other organic materials, oxidation and sublimation effects at elevated temperatures limit life. Shelf Life: 3 months.
Curing time: 3.5 hours at +350F (170C)
Package: 4 x 10 ml A and 4 x 15 ml B
Sklar Instruments Sklar Instru-Guard Lube, 8oz. Bottles Sklar stru-Guard Lube SDS Ready To Use Spray - Case of 12
Sklar Instru-Guard Lube, 8oz. Bottles Sklar Instru-Guard Lube SDS Ready To Use Spray - Case of 12
Electron Microscopy Sciences Quick-Bond - Aron Alpha 200 5 x 2g/bx
Aron Alpha, Type 200, is a one component, room temperature curing structural adhesive composed mainly of alpha cyanoacrylate monomer in a liquid state. When this monomer is applied in a single thin coating to the bonding surface of the material, it instantly solidifies through polymerization to produce an extra high strength, colorless bond with virtually no shrinkage.